| 8) If you
are using a dry gas standard, depress the button on the regulator for 6
seconds. (If you are using a Wet Bath Simulator & Solution for a
standard, you should blow into the inlet port of the simulator for at
least six seconds). Using either type of standard, on the 4th or
5th second of the 6 second count, press the read button.
(NOTE: The gas/vapor must be flowing through
the mouthpiece when the read button is depressed and it is
suggested that it flow for at least one second after the READ button has
been depressed).
|
Regulator button depressed
READ button is depressed –
reading is beginning to climb
|
