SAMPLING REQUIREMENTS

Sample Error Detection
The software monitored self-diagnostic system requires proper battery power, proper instrument temperature, successful instrument pretest blank and the delivery of a "deep lung" breath specimen before automatically taking a sample.

Mouthpiece
Individually wrapped common 1/4 inch diameter drinking straws.

Power Supply
110/60Hz or 230V/50Hz, 80 Watts

Size/Weight
Height: 5 1/2",  Width: 17 3/4",  Depth: 16 1/2"
Weight: 14lbs

Case Construction
Aluminum case, aluminum frame

Data Storage
128K of RAM (approx. 1,000 tests)

Display
Sixteen character two line alpha-numeric backlit liquid crystal display.

Communications
The AlcoMonitor CC can be connected to an run with a printer or a computer through the serial RS232 communications port on the rear of the instrument.  The AlcoMonitor CC ca also export data through an external modem connected to a serial port on the rear of the instrument.

Input/Output Devices

Keypad
12 digit numeric keypad, capable of entering subject ID# and other user question information.

Printer
Will interface with most serial printers.  Both slip and roll impact printers are available through Intoximeters.

Audio
Beeper provides an audible tone indicating different stages of test procedure and provides a warning signal to draw attention to error messages.

Modem
This option output device can be purchased from Intoximeters for exporting data over phone lines.

UNIQUE FEATURES
The unit features completely automated accuracy checks, calibrations and testing protocol.

ANALYTICAL

Sensor
The fuel cell sensor generates a response that is proportional to Breath Alcohol Concentration. The response is linear and requires one point calibration.

Accuracy & Precision
US DOT approved for evidential use. Meets and exceeds the federal model specification for traffic enforcement and Omnibus Breath Alcohol Testing.

Specificity
The fuel cell sensor is sensitive to alcohol. It does not respond to acetone or other substances which are found in the breath.

Measurement Limits
The AlcoMonitor CC can accurately detect breath alcohol levels up to .400 BrAC.

Response Time
The instrument responds within 10 seconds on negative samples and within 30 - 45 seconds on positive samples.

Sampling Rate
The patented analytical system permits quick results, more positive tests per time period with no appreciable loss of sensitivity.

Calibration
Calibration checks can be performed with either a National Highway Traffic Safety Administration (NHTSA) approved wet bath simulator or a dry gas standard.  Fully automatic calibrations are run using a dry gas standard.